Tall flowerpot made of glass composites - vinylester and polyester

Original planters are gaining increasing popularity due to their unconventional shapes, vibrant colors, and design that was previously unavailable in such form as today.

We are pleased to present to you the collection of modern planters by Kama Flower, which offers products distinguished by exceptional quality and a wide range of shapes, sizes, and colors. The pots are made from durable and highly resistant materials, making them suitable for outdoor use as large garden planters or as excellent interior decorations.

Planters are the perfect addition to offices, homes, apartments, and gardens. They also work wonderfully as elements of small architecture on streets and in parks. Everyone will be captivated by their unique shape and refined beauty.

Plants can be planted directly in the planter or in an additional insert placed inside the planter. Inserts are available for all models of planters, and their size is more than sufficient for most plants. These inserts, along with the plant, can be easily removed from the planter—they are equipped with handles. This allows for very simple replanting and simplifies maintenance tasks such as repotting. Using inserts also ensures immediate replacement of a sick or dried plant with a new one, previously planted in a separate insert and cared for as a reserve. This is especially important in prominent locations where greenery should always be attractive.

Garden or terrace planters (except for the Parga model) can be purchased with wheels, which facilitate easy movement. In this case, plants should be planted in the insert to prevent the planter's weight from becoming too heavy. The wheels have non-marking tires and are placed in a special recess at the bottom of the planter—they are practically invisible.

Our planters are very lightweight yet extremely durable. Their light weight, combined with the ability to plant in inserts, allows them to be safely placed on balconies, rooftops, or terraces. They will delight residents and create an excellent atmosphere without risking overload of the surface.

RESISTANCE AND DURABILITY

Planters are made from glass-reinforced vinyl ester and polyester composites. This technology is used and proven in the production of marine yachts. We use the best materials from renowned manufacturers, guaranteeing their excellent quality. As a result, we can offer products at the highest global standard.

They can be used both indoors and outdoors. They are perfect as garden planters, terrace planters, interior planters, and as elements of small architecture on streets and in parks.

Resistant to water, high temperatures, and strong frost (if no water remains inside), sunlight, exhaust fumes, air pollution, and biological factors. They are also very durable and long-lasting. In this regard, they far surpass ceramic planters—they cannot be broken or chipped, unlike steel or wooden ones, which degrade over time. The surface of the planters is perfectly smooth and glossy, significantly reducing dirt accumulation.

GARDEN PLANTERS

When using garden planters, it is important to protect them from damage caused by freezing water inside. When water freezes and turns into ice, it expands by about 10%—trapped in a closed space, it exerts enormous force on the walls. To prevent this, holes should be made in the bottom of the planter to allow excess water to escape. Three holes of 6 mm diameter drilled in the lowest part of the bottom in a ring shape are sufficient. For drilling composites, standard metal drills are used, and this can be done by yourself or commissioned when ordering the planters. If plants are planted in inserts, similar holes should also be made in them. Soil should never be poured directly into the bottom of the container but always over a drainage layer covered with geotextile. Gravel, expanded clay, or small stones can be used as drainage. This prevents the holes from clogging and allows excess water to drain freely.In cases where the plan is to leave the pots outside during winter, some plant species are at risk of root ball freezing during severe frosts. In such cases, when planting the plant, an insulating layer should be placed inside the walls of the pot, made from materials such as polystyrene or bubble wrap. It should be approximately 10 centimeters thick.

If the plants in the inserts are very developed, the pots may be knocked over by the wind. To prevent this, additional weight such as stones, sandbags, etc., can be placed at the bottom inside the pot.

It looks very attractive if the soil in the pot is covered with a decorative layer of gravel, pebbles, or bark. For garden pots, this also limits weed growth and prevents the soil from drying out. When using inserts, the decorative layer will hide their edges, making them completely invisible.

LARGE POTS

When choosing the type and size of pots, it is important to consider whether it will be possible to carry large pots—especially XL and XXL—to the planned location. Sometimes, door and window dimensions can be limiting.

Pots manufactured by KAMA flower are very lightweight and extremely durable. This is due to proper design, the materials used, and the technology applied. The weight of small-sized pots (S) ranges from 3 to 4 kg depending on shape, medium-sized (M) from 5 to 7 kg, large (L) from 7 to 9 kg, XL from 18 to 24 kg, and XXL from 26 to 34 kg. Such lightweight pots can be easily transported and placed anywhere. Even lifting them onto a roof or terrace of a building is not very difficult if they are too large to carry through the staircase.

Pots filled directly with soil without inserts can be very heavy. Soil density is approximately 1.5 kg/liter, so the weight of filled XXL-sized pots can reach up to 1000–1500 kg. It is important to choose the location carefully for placing them, as moving them later can be very difficult. Also, check whether the terrace, veranda, or balcony can withstand such weight.

Pots (except for the Parga model) can be equipped with wheels upon request. The wheels are suitable for hard surfaces and greatly facilitate cleaning of the interior. If this option is chosen, plants must be planted in the insert, not directly in the pot – as the pot would be too heavy.