An elegant fountain for a stylish garden - Italpark

The company ITALPARK has been present in the market for over 45 years. The founder, Mr. SPINONI BENIAMINO, aimed to make every effort to replicate stone. It can be said that year after year, thanks to passion and perseverance, this goal has been achieved. It was due to continuous commitment that in 1978 the brand won the "Apollo D'Oro," an important European trade award. By using exclusively high-quality Italian raw materials, marble graniglia (the famous Carrara marble), and white cement, it can be confidently stated that ItalPark products have incomparable density and are resistant to any climate and bad weather.

MILLENIUM LINE

Gargoyles, trolls, griffins, elves, and more.

Italpark produces the entirely realized "Millenium Line" with high-quality raw materials such as Carrara marble grit. This line is dedicated to the fantasy genre and eccentric sculptures like gargoyles, trolls, griffins, elves, and more. In the wide range offered by this famous Italian company, you will find a broad selection of elegant products dedicated to gardens, such as fountains, pillars, balustrades, and even modern art.

Color and finish of products

The treatments performed by Italpark are usually done by hand. The final appearance is almost natural aging, which shows the decorations and details of the models in the photos. The hydrophobic treatment (see no. 3-4-5-6-7-8-9-10) has the following functions:

– slows down natural aging
– impregnates the product surface
– provides greater resistance to atmospheric factors (especially ice).

Italpark produces 10 different types of finishes:

1. Natural white
2. Antique white
3. Natural white + glossy
4. Antique white + glossy
5. Tuff nuance
6. Terracotta nuance
7. Black 2.0
8. Old London
9. Alpine stone
10. Bronze

Italpark fountains are designed for outdoor use, operating with a closed-loop pump that does not need to be connected to any water source. During operation, some water loss may occur due to splashing, evaporation, or wind. The pump must never run dry.

NOTE: According to the law, a 30 mA residual current device must be placed between the pump and the electrical supply if the fountain is used outdoors. All cable extensions should only be performed by a qualified electrician.

IMPORTANT: In winter, all Italpark fountain components must be drained of water (plastic ring, pipes, bowl, and pump). To ensure the integrity of the fountains, waterproofing material should be applied when the temperature drops below 3 degrees Celsius.

Italpark suggests impregnation in countries where the climate is particularly cold.

ASSEMBLY: The fountain should always be installed on a strong and leveled base. After setting the fountain base and ensuring it is level, continue building the fountain, ensuring each bowl is leveled using wedges (wood or plastic) if necessary, and ensuring they do not compromise stability.

BASIC CARE: The following steps should be considered important, as an addition to the instructions you will find in the box with the pump. It is very important to soften the water using a descaler and algaecide. Every 2 months, the fountain should be emptied, and the pump, nozzles, and filters should be removed and cleaned with vinegar or descaler if necessary to dissolve excess limestone.